top of page

System S-525 Sliding/ Folding Grille

Distinctive, rugged and durable, it combines some of the strength of the Concept model with the lightweight appearance of the S-126 folding grille system.

Curtain Construction

The top and bottom of each panel section is fitted with a 102mm high aluminium panel. This panel consists of an aluminium extrusion 2mm thick. It is connected into extruded hinge cleats with a 15° o set to facilitate folding. The curtain is constructed from 12mm aluminium tubes centred on a solid core which are connected across their span via a 75mm wide x 50mm high decorative plate. These plates are arranged in two different patterns giving the ‘S-525’ or ‘S-12’ models. PLEASE NOTE – these are open grilles and can be accessible by arm/ hands.


Allow 95mm per linear metre of System S-525 Sliding/ Folding grille, then add 76mm for each post member (lead, intermediate or end posts). Approximates to about 15% of System S-525 Sliding/ Folding grille length.



S-525 (1).jpg
bottom of page