Concept 33 Sliding/ Folding Grille

Widely specified for use in enclosed retail and public environments, including retail shopping centres, airport terminals, superstores, in-store concessions, countertops and bars, bank lobbies and ATM areas, kiosks, railway stations, ferries, ports, marinas, museums, schools and public buildings. In fact, wherever people and areas need to be seperated by a simple, secure screen system sliding shutter.

A SimFlex Spec Sheet

Curtain Construction

The top and bottom of each panel section is fitted with a 102mm high aluminium panel. This panel consists of an aluminium extrusion 2mm thick. It is connected into extruded hinge cleats with a 15° offset to facilitate folding. The curtain is constructed from 12mm aluminium tubes centred on a solid core which are connected across their span via 75mm decorative plates. The checker plate pattern is created by alternating the plates and spaces. PLEASE NOTE – these are open grilles and can be accessible by arm/ hands.


Allow 95mm per linear metre of Concept 33, 66, 99 and 1212 Sliding Shutter, then add 76mm for each post member (lead, intermediate or end posts). Approximates to about 15% of Concept 33, 66, 99 and 1212 Sliding Shutter length.



Screenshot 2021-02-09 at 13.48.50.png